Skip to navigation | Skip to content | Skip to footer



Bonny Moorhen

Price: £42,000

A 45ft 2010 Collingwood Boatbuilders 2 berth traditional stern narrowboat.

Bonny Moorhen comes as a ready to use live aboard but may also be suitable as a leisure boat.

Entering the boat from the traditional stern is an enclosed engine room which houses electrical components and storage for mooring pins and windlasses etc.

As you step down into the boat you enter the saloon. This has a two seater settee, various shelves and a desk area. There is a solid fuel Salamander Hobbit stove in the corner for additional heating.

The saloon flows into a well presented galley kitchen. This is equipped with a gas oven/grill, Belfast style ceramic sink with a two door side hatch just above it. Beneath the worktops there are cupboards and drawers.

Next is a walk-through bathroom where there is a bath with overhead shower, ceramic hand basin and separating compost toilet which also has the option to be used with a cassette instead.

At the far end of the boat is the sleeping cabin which has a king size double bed. There is a shelf with hanging storage and additional storage under the bed. In the corner sits a horizontal calorifier with removable cover.

In addition to the solid fuel stove, there is a diesel filled radiator in the saloon and sleeping cabin and a heated towel rail in the bathroom.

On the bow deck sits an insulating compost bin and at the very front is a gas locker housing two 13kg propane gas bottles.

There are two 325w solar panels on the roof.

To arrange a viewing please contact Hilperton Marina on 01225 765243.

General

General
NameBonny Moorhen
BW index number519097
Safety certificateYES
BSS certificate expiry22nd February 2024
LocationHilperton Marina
Price£42,000
Berths
No. of Berths2
Double beds1 (king size)
Double beds (temp)--
Single beds--
Single beds (temp)--
Size
Overall length45 feet
Overall beam6 feet 8 inches
Overall draft1 feet 7 inches
Overall headroom6 feet 3 inches
Style of sternTraditional

Structure

Manufacturer
ManufacturerCollingwood Boats
Hull ID No.--
Build date2010
Material
BaseSteel
HullSteel
Cabin sideSteel
RoofSteel
Original steel thickness
Base10mm
Hull6mm
Cabin6mm
Hull blacking
Last hull blacking2020
WhereWhilton Marina
Anodes
FittedYES
Date fitted2020
Size--
No. of anodes--

Running gear

Engine
MakeIsuzu
Model35 - 4 cylinder diesel
Year--
FuelDiesel
Cooling--
Hours--
Last serviced date--
Last serviced by--
Gearbox
MakePRM
Model120
Reduction--
Coupling--
Shaft diameter--
Propellor size17"

Capacities

Fuel--
Water--
Gas typePropane
No. of gas cylinders2
Gas cylinder size13 kg

Interior

Fitted
Fitted byOriginal Owner
Date fitted2010
Materials used
Floor--
Hull sides--
Cabin sides--
Deckhead--
Bulkheads--
Fittings--

Equipment

In the galley
CookerThetford
Cooker modelCaprice
Fridge--
Fridge model--
Other--
In the bathroom
BathYes
ShowerYes
Hip bath--
BasinYes
Toilet typeCompost
Toilet make--
Toilet model--
Toilet tank capacity--
Toilet remarksSeparate Porta Potti
Heating
TypeDiesel
MakeMikuni
ModelMX40
FuelDiesel
Other remarks--
Electrical systems
DC voltage12v
No. of batteries (start)1
No. of batteries (domestic)4
Split chargingTrue
Other2 x 325w JA Solar Panels + Victron Charge controller 150/45mppt
Hot water
TypeDiesel
MakeMikuni
ModelMX40
FuelDiesel
Other remarksCalorifier in bedrrom
Additional heatingSolid fuel Hobbit Salamander stove in saloon - fitted in 2020.
240 volt electrical systems
Inverter makeShoreline
Inverter rating2100w
Generator make--
Generator rating--
ShorelineYES
Other--

Other

Additional information
CO2 and smoke alarms fitted (Last tested 2022)

Boat plan

Bonny Moorhen - boat plan